1. A. Kocov, J. Lazarev: “Computer Aided Engineering in Plastic Deformation Machines”, Proceedings, Facul.of Mech. Eng. No 10, Skopje 1991
2. A.Kocov, J.Lazarev: “Using Finite Element Method in Analysis of Stress-Strain Condition in Fine Blanking Process”, Proceedings , V Conference for Theoretical and Applied Mechanic, Ohrid, June, 1994
3. A. Kocov, J.Lazarev: “Solving the Problem of the Limit of the Plastic Zone in Process of Fine Blanking”, Proceedings, 11th Danubia Adria Symposium on Experimental Methods in Solid Mechanics, Baden/Vienna, Austria, October 1994
4. A. Kocov, J.Lazarev: "Finite Element Analysis of the Stress-Strain Condition in Process of Fine Blanking”, 13th International Conference for Production Engineering, Tel Aviv, Israel, August 1995
5. A. Kocov, J.Lazarev: “Finite Element Analysis of the Stress-Strain Condition of the Process of Axysimetric Extrudion” 3rd Conference on Production Engineering CIM’95, Zagreb, Croatia, 1995
6. A.Kocov, J.Lazarev: “Analysis of the Stress-Strain Condition in the Cutting Surface in the Process of Fine Blanking by using LUSAS-CAD (Finite Element Method)”, 3rd Conference on Production Engineering CIM ‘95 Zagreb, Croatia, 1995
7. Lj. Dudeski, V.Dukovski, G.Vrtanovski, A.Kocov: “Statical and Dynamical Behaviorof the Machine Tool Structure by the Design Parametar’s Influence”, II Konferencija Naukowa, Szklarsa Poreba, 1995
8. A.Kocov, J. Lazarev: “ Numerical Methods for Solving the Stress-Strain Condition In The Process Of Fine Blanking”, Internacional Manufacturing Engineering Conference, Storrs, Connecticut, USA, 1996
9. A.Kocov, J.Lazarev: "Determination of the Optimal Process Parameters of Fine Blanking by Using Finite Element Analysis”, the 14th ICPR, Osaka, Japan, August 1997
10. A.Kocov, J.Lazarev :“Computer - Aided Mathemtical Model for Detrmination of the Optimal Fine - Blanking Process Parameters”, 32nd International MATADOR Conference, Manchester, United Kingdom, July 1997.
11. A.Kocov, J.lazarev: A new approach in die set's design, 6th ICTP, Nuremberg, Germany, September 1999
12. J.Lazarev, A.Kocov, J.Caloska: Numerical and experimental investigation for determination of the optimal process parameters of fine blanking, AMTECH'99, Plovdiv, Bulgaria
13. D.Spaseska, J.Lazarev, A.Ko~ov, D.Dimeski: Matemati~ki dizajn na proizvodniot proces na kompoziten materijal na baza na stakleni vlakna, 16 Kongres na hemi~arite i tehnolozite na Makedonija, Skopje, Makedonija, 1999
14. A. Kocov, J.Lazarev: Numerical and experimental investigation of stress-strain situation of composite-based die sets for press tools, AMST '99, Udine, Italy
15. A.Kocov, J.Lazarev, D.Spaseska: Metal forming tools made from glass-fiber based Composite material, Advancing in Composites 2000, Milan, May 9-11, Italy
16. A.Kocov, J.Lazarev: Finite element analysis of metal forming tools made from composite material, (KWPI) Komputerowe wspomaganie prac izynierskich ; Wroclav, Poland june 2000
17. A.Kocov, J.Lazarev: Composite based die sets, ICIT-TECOS 2001, Rogaska Slatina, Maribor, Slovenia, 2001
18. A.Kocov, J.Lazarev: Optimization of fine blanking process's parameters by using FEA, TECOS 2001, Ljubljana, Slovenia
19. A.Kocov, D.Spaseska, J.Lazarev: Experimental and numerical investigation of the Composite MAterial used in Metalforming tool’s design, 16th International Conference on Production Research ICPR-16, Praha,Czech Republic, August 2001.
20. A.Ko~ov, J.Lazarev, D.Spaseska: Jakost i krutost na kompoziten materijal vs. metal i metalni leguri pri svitkuvawe, Zbornik na trudovi na MFS, Skopje, 2001
21. A.Kocov, J.Lazarev, D.Spaseska: " Application of Composite Materials in Metalforming Tool's design", AMPT 01, International Conference on Advances in Materials and Procesing Technologies, 18-21 September 2001, Leganes (Madrid, Spain),
22. I.Lazarev, Q.Dudeski, A.Ko~ov: Ispituvawe na naponsko-deformacionata sostojba na matrica za vle~ewe `ica, Zbornik na trudovi na MFS, Skopje, 2002
23. A.Kocov, J.Lazarev, D.Spaseksa: “Numerical and experimental investigation of glass-epoxy composite used in metalforming tool's design”, 9th International Conference on Metal forming, Birmingham 2002
24. I.Lazarev, Q.Dudeski, A.Kocov: Ispituvawe na naponsko-deformacionata sostojba na matrica za vlecewe `ica, Zbornik na trudovi na MFS, Skopje, 2003.
25. A.Kocov, J.Lazarev, D.Spaseksa: “Numerical and experimental investigation of glass-epoxy composite used in metalforming tool's design”, 9th International Conference on Metal forming, Birmingham 2003.
26. Atanas Kocov, D.Spaseka, J.Lazarev: “Correlation between production’s process parameters of glass-fiber based composite materials with its mechanical properties”, ECCM 11-11th European Conference on Composite materials, Rhodos, Greece, may 30-june 3, 2004.
27. Atanas Kocov, Jovan Lazarev, Ljuben Dudeski, Dijana Spaseska:”Experimental determination of the mechanical properties of composite material used for metalforming tool design”, 1st International conference for production engineering and management, Ohrid, Macedonia, September 2004.
28. Atanas Kocov, Mark Tuttle, Paul Labossiere, Patrick Gates:” Experimental determination of the flexural rigidities of traiskate’s”, 1st International conference for production engineering and management, Ohrid, Macedonia, September 2004.
29. Igor Lazarev, Ljuben Dudeski, Atanas Kocov: ”Determination of the stress-strain condition for the process of wire drawing by using finite element analysis”, 1st International conference for production engineering and management, Ohrid, Macedonia, September 2004.
30. A.Kocov, Lj.Dudeski, I.Lazarev: “Analysis of the stress-strain condition of the wire drawing’s die by using fea”, 5th International Conference on industrial tools, ICIT 2005, Velenje, Celje, Slovenija, April 12-15 2005, pg. 73-78.
31. Atanas Kocov, Mark E. Tuttle, Paul Labossiere, Patrick Gates: “ Specific demands for material characteristics for producing Trailskates”; 5th International Conference on industrial tools, ICIT 2005, Velenje, Celje, Slovenija, April 12-15 2005, pg. 143-148.
32. A.Kocov, R.Polenakovik, T.Rizov: Supply Chain Management - the key for improving Macedonian SMEs’ competitiveness Supply Chain Management for the machine tool industry in Macedonia, , ICIT 2007, Bled, Slovenija.
33. A.Kocov: Competivitiness of Macedonian tool and die industry sector based on usage of ICT, 6th International workshop on e-living laboratories, October 2008, Kranj, Slovenia
34. A.Kocov, T. Rizov: Creating Copmrehensive e-Library for the Macedonian Machine-Tool Industry; 14th International Science Conference Industrial Systems 08, Novi Sad, Serbia, October 2008.
35. A. Kocov, T. Rizov, R. Polenakovic, J. Clendenin: Supply Chain Management – experiences from our country; 12th Panhelenic Conference on Logistics – Logistics in South East Europe: Crossroads of International Trade, Thessaloniki, Greece, November 2008.
36. A.Kocov: Relevance of e-Collaboration in Cross-border Disaster e-Response and Environmental protection by implementing Cleaner production technologies; networking among countries, 7th workshop on International cross border cooperation in Western Balkan Countries held in Skopje on the period of time May 4-6, 2009
37. A.Kocov: Cleaner production technologies in Macedonian SMEs – case study: AgBIZ companies; PREPARE (Preventive Environmental Protection Approaches in Europe) net meeting in Kalundborg, Denmark, on April 15-17, 2009
38. A.Kocov: The CP concept as first phase for the improvement of the efficiency of the company, conference "Joint Actions on Climate Change" (www.jaocc.net) (Aalborg, Denmark, June 8-10, 2009) jointly organized by Aalborg University, PREPARE Network, Greening Industry Network and Nordic Life Cycle Association,
39. A.Kocov: Continuous application of an integrated preventive environmental strategy applied to processes in Macedonian companies, WBC-INCO.NET (www.wbc-inco.net) setting of regional priorities - Consultation Session on environnement , June 16 and 17, 2009 in Skopje/Republic of Macedonia
40. A.Kocov, J.Caloska: Signification of implementation of CP concept for improvement of the competitiveness of the Macedonian companies; The International Conference Management of Technology - Step to Sustainable Production (MOTSP 2009) which was held in the city Shibenik, on the Adriatic coast, Croatia from 10 - 12 June 2009, http://motsp2009.info/
41. Jovan Lazarev, Atanas Kocov, Dijana Spaseska,: Glass/epoxy composite used as a base of metalforming tool's design, Journal for Technology of Plasticity; Novi Sad, Vojvodina, Yugoslavia, 2001
42. A.Kocov, J.Lazarev, D.Spaseksa: “Numerical and experimental investigation of glass-epoxy composite used in metalforming tool's design”, Journal of Material Processing Technology 125-126 (2002), Elsivier Science, pg.537-542
43. A.Kocov, I.Lazarev : “FE Analysis of the Stress-Strain condition for the process of wire drawing”, Journal for Technology of Plasticity; Novi Sad, Vojvodina, Yugoslavia, 2003.
44. A.Kocov etc: Correlation Between Production’s Process Parameters Of Glass-Fiber Based Composite Materials With Its Mechanical Properties; Authors:Atanas Kocov, Dijana Spaseska and Jovan Lazarev; Vol/Issue/Date: 1.1, June 2004; Section: 11th European Conference On Composite Materials, May 31- June3, Rhodes, Greece – Journal for Automated Manufacturing Of Composites.
45. A.Ko~ov: LUSAS FEA – software; objavena statija vo Da Vin~i, informator na Sojuzot na studentite pri Ma{inskiot fakultet - Skopje, god. II, broj 3, maj 1994
46. A.Kocov: Global opportunities through ICT for the Macedonian SMEs from the tool&die sector, SIPPO Bussiness forum, Zurich, Swiss, Novemebr 2005.
47. A.Kocov: Implementation of the advanced engineering services in the Macedonian tool&die sector through the University, ASO Seminar: New social role of the Universitites in the SEE, Bulgaria, December 3, 2005.
48. A.Kocov: Macedonian tool&die industry; before and beyond, German Rector Conference, Kotor, MonteNegro, September 26-29, 2006.
49. A. Kocov: Improvement of the competitivness of the Macedonian tool making companies by implementation of the advanced engineering technologies” Ist regional conference on clustering and networking, Rogla, Slovenia, September 6-8, 2006.
50. A.Kocov, R. Polenakovic, T.Rizov, B.Jovanovski: Positive Macedonian experience with foreign funded project (Cases of USAID and ADA funded projects), ASO Confernce, Sofia, Bulgaria, December 2006.
51. A.Kocov, CIRKO MES CE delivers services for improved competitiveness of the SMEs, case study for the TDI FDI, Skopje, Macedonia, March 2007.
52. A.Kocov, T.Rizov, K.Markovska: Rapid Prototyping (3D Printing) technology, market study to determine the specific segments of the Macedonain tool-and-die industry for extend of their competitivness on the global market”, EDC, Boston, USA, September 2007
53. А. Kocov, Т. Rizov: Supply Chain Management – tools for raising competitiveness of Macedonian tool and die companies, Kuehne+Nagel workshop on logistics and transportation, Skopje, November 2007.
CV.pdf
